Multipurpose Nano Coating
Multi Purpose is an advanced Coating that prevents the staining on a different surfaces of the vehicle by creating a nano sized coating barrier that repels liquids and prevents staining. Multi Purpose does not change the color or texture.
Simply apply the coating and wipe it up after 15-20 sec.
Can be applied on Polyurethane/Acrylic automotive paint , Plastic, Leather, Fabric etc. Always check surface first!
Benefits
May be Not suitable for some Models or Freshly painted parts
TECHNICAL EXPERIMENT RESULTS Surface: Polyurethane/Acrylic automotive paint Consumption: 5 ml/m2
Coating Thickness: 200-300 nm
WCA:97° @20 nL
WSA: 25 ° @20 nL
Salt spray test: 480 h, reduce in %22 hydrophobia, % 17 coating thickness
Washing test: 50 cycles 0.15 kg/cm2 with ph notr auto detergent; %22 hydrophobia,%20 coating thickness reduction
Wind effect: 480h, 100 km/h wind tunnel, substrate is 45° angle to flow, reduction %24 in hydrophobia, ,%16 coating thickness reduction
UV protection: 290 nm,1000W, 35 cm; 480 h effective, no change in colour and a little bit increase in hydrophobia
Temperature durability: Effective up to 275° C
Chemical reistance acidic: Effective ph>1
Application Instructions Coating:
- Wash thoroughly, degrease and dry the surface.
- Shake container before use for 2-3 minutes.
- Apply a small amount of Coating Applicator on a sponge.
- Evenly apply the composition to the surface.
- The composition is applied to the surface for good- not missing spots
- Excess clean with microfiber.
- If Coating is applied to the polished part, will be necessary to use microfiber to polish surface.
- Coating is a very flow – follow the flow of the product!
- Avoid direct sunlight and high humidity during application.